Best Edge To Edge Stud Finder 2019 Ultimate Buying Guide and Reviews

Home » Measuring and Layout Tools »

Best Edge To Edge Stud Finder

10 Best Edge To Edge Stud Finder of 2019

  1. Stud Finder
  2. Zircon Studsensor E50 Electronic Wall Scanner Edge Finding Stud Finder
  3. Stud Finder
  4. Zircon Studsensor A100 New Electronic Wall Scanner Edge Finding Stud Finder
  5. Stud Finder
  6. Stud Finder
  7. Stud Finder
  8. Stud Finder
  9. Stud Finder
  10. Zircon Studsensor 70 Center Finding Stud Finder

Tips on how to economize to 86%! Let’s figure it out.

You probably should start save money when you look at my url. If you don’t be concerned about brand names, after that sort edge to edge stud finder by the value and pick your one because of the best discounted rate.

Warning! Don’t buy any edge to edge stud finder until you read this! Click to read.

Test Results with Ratings for Edge To Edge Stud Finder

Rating Image Name and Features Details
4.8
Stud Finder 1. Stud Finder
The digital wall scanner includes four different scanning modes for woods, beam, joist, metals, ac wires and deeply embedded objects.
Read reviews
4.5
Zircon Studsensor E50 Electronic Wall Scanner  Edge Finding Stud Finder 2. Zircon Studsensor E50 Electronic Wall Scanner Edge Finding Stud Finder
Studscan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while deepscan mode locates targets up to 1.5 inches (38 mm) deep.
Read reviews
4.3
Stud Finder 3. Stud Finder
The digital wall scanner includes four different scanning modes for woods, metals, ac wires and deeply embedded objects.
Read reviews
4.0
Zircon Studsensor A100 New Electronic Wall Scanner  Edge Finding Stud Finder 4. Zircon Studsensor A100 New Electronic Wall Scanner Edge Finding Stud Finder (Best Transitional Design)
Wire warning detection indicates the presence of live, unshielded electrical ac wiring while scanning in studscan and deepscan modes.
Read reviews
3.8
Stud Finder 5. Stud Finder
Graphical lcd display this display indicates many cues in detection, such as detection mode, signal strength, automatic calibration, and battery indication, all with maximum readability.
Read reviews
3.5
Stud Finder 6. Stud Finder
The digital wall scanner provides four scanning modes in total for detection.
Read reviews
3.3
Stud Finder 7. Stud Finder
Adopted to automatic calibration technique.
Read reviews
3.0
Stud Finder 8. Stud Finder
Multi-scanner stud finder for wood, metal, deep, ac current.
Read reviews
3.0
Stud Finder 9. Stud Finder
This small scanning device may be technologically advanced, however, it is very easy to use.
Read reviews
3.0
Zircon Studsensor 70 Center Finding Stud Finder 10. Zircon Studsensor 70 Center Finding Stud Finder
Studscan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep.
Read reviews

 

At this point , We should Discuss three Best Edge To Edge Stud Finder of 2019

 

 

№ 1. Stud Finder Sensor Wall Scanner, 4 In 1 Multi Function Electronic Stud Sensor Finders Wall Detector Center Finding with LCD Display for Wood Ac Wire Metal Studs Detection (black)

 

Ease of use
5/5
 

Versatility
4/5
 

Performance
5/5
 

Quality
5/5
 
Overall Brand Model Dimensions Weight Details
4.8
Tavool 6.5 x 2.8 x 1.1 inches 7 ounces
Check Price

This edge to edge stud finder is the winner because of:

Automatic calibration and simple use – turning on the stud finder and completing calibration by placing the wood beam finder on the wall when the beep sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. The wood beam finder will flash and beep once it has picked up the edge of a stud. Ergonomic grip for comfortable use – the ergonomic design of this wall stud finder makes it comfortable to hold from any angle. This stud joist finder wall detector can quickly locate the metal wood ac wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing tvs, cabinets, garage shelves etc. Advanced sensors technology for accurately and quickly locates studs wood metal ac wires. – a good stud finder detector needs to be accurate. Tavool wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/ac wires in multiple locations on your wall. Whether you are a professional, homeowner or a diy enthusiast, you can find great use in this digital stud scanner. Please note: nabinii stud finder is tavool stud finder.

Easy to read lcd screen displaying the desired stud material as well as the precise position of the stud the tavool digital stud scanner features large lcd display together with the big sound warning to detect the accurate location of the objects. When find the material, the lcd display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion easier. 4 in 1 multifunction plus deep detection – the digital wall scanner includes four different scanning modes for woods, beam, joist, metals, ac wires and deeply embedded objects. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe, rebar, aluminum and copper up to 1.57 inches. Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt ac current for voltage and live electrical lines up to 2.36 inches.

 

 
Pros
4 in 1 multifunction plus deep detection
Easy to read lcd screen displaying
Cons
It is impossible to find any flaws in this product.
 

 

 

№ 2. Zircon Studsensor E50 Electronic Wall Scanner Edge Finding Stud Finder Live Ac Wirewarning Detection, Ffp

 

Ease of use
3/5
 

Versatility
5/5
 

Performance
5/5
 

Quality
5/5
 
Overall Brand Model Dimensions Weight Details
4.5
Zircon 68277 8.5 x 4 x 2 inches 7.2 ounces
Check Price

Why did this edge to edge stud finder have the second place?

Studscan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while deepscan mode locates targets up to 1.5 inches (38 mm) deep. One fully charged 9v battery, not included, is required for the stud scanner to run at optimal performance. The zircon ss e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live ac wires helping you easily find studs and avoid hazards while mounting a tv, hanging cabinets, installing garage shelving and more. Wirewarning detection indicates the presence of live, unshielded electrical ac wiring while scanning in studscan and deepscan modes.

Patented “over the stud” indicator and spotlite pointing system ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size.

 

 
Pros
The zircon ss e50 electronic stud scanner detects
Studscan mode locates
One fully charged 9v battery
Wirewarning detection indicates
Patented “over
Cons
Looks awful.
The instruction manual has many mistakes.
 

 

 

№ 3. Stud Finder Wall Scanner, 4 In 1 Electronic Stud Sensor Wall Detector Wood Beam Finders Center Finding with Battery and LCD Display for Wood Ac Wire Metal Studs Detection (black)

 

Ease of use
5/5
 

Versatility
4/5
 

Performance
3/5
 

Quality
5/5
 
Overall Brand Model Dimensions Weight Details
4.3
Tavool 6.5 x 2.8 x 1.1 inches 7.2 ounces
Check Price

Why did this edge to edge stud finder is on the third place?

Ergonomic grip for comfortable use – the ergonomic design of this wall stud finder makes it comfortable to hold from any angle. This stud finder wall detector can quickly locate the metal wood ac wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing tvs, cabinets, garage shelves etc. Automatic calibration and simple use – turning on the stud finder and completing calibration by placing the stud finder on the wall when the beep sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. The finder will flash and beep once it has picked up the edge of a stud. Advanced sensors technology for accurately and quickly locates studs wood metal ac wires. – a good stud finder detector needs to be accurate. Tavool wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/ac wires in multiple locations on your wall. Whether you are a professional, homeowner or a diy enthusiast, you can find great use in this digital stud scanner. 4 in 1 multifunction plus deep detection – the digital wall scanner includes four different scanning modes for woods, metals, ac wires and deeply embedded objects. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe, rebar, aluminum and copper up to 1.57 inches. Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt ac current for voltage and live electrical lines up to 2.36 inches.

Easy to read lcd screen displaying the desired stud material as well as the precise position of the stud the tavool digital stud scanner features large lcd display together with the big sound warning to detect the accurate location of the objects. When find the material, the lcd display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion easier.

 

 
Pros
4 in 1 multifunction plus deep detection
Easy to read lcd screen displaying
Cons
It is very hard to store because of the big size.
 

 

 

So What Can Now we Say About Some other Edge To Edge Stud Finder

 

 

№ 4. Zircon Studsensor A100 New Electronic Wall Scanner Edge Finding Stud Finder Live Ac Wirewarning Detection

 

Ease of use
2/5
 

Versatility
4/5
 

Performance
5/5
 

Quality
5/5
 
Overall Brand Model Dimensions Weight Details
4.0
Zircon 69331 1.6 x 2.9 x 6.8 inches 8.8 ounces
Check Price

Why did this edge to edge stud finder is on the fourth place?

One fully charged 9v battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards. The zircon ss a100 electronic stud scanner is sold exclusively on amazon and detects the edges of wood and metal studs up to 1.5 inches (38 mm) deep. Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle. Patented “over the stud” indicator and spotlite pointing system ensure the a100 provides trustworthy results. Wire warning detection indicates the presence of live, unshielded electrical ac wiring while scanning in studscan and deepscan modes.

 

 
Pros
Patented “over
Ergonomically designed grip allows a comfortable hold on
One fully charged 9v battery
Wire warning detection indicates
Cons
Not designed for regular use.
 

 

 

№ 5. Stud Finder Wall Scanner, 3 In 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor and Sound Warning for Studs Wood Metal Live Ac Wires Detection

 

Ease of use
4/5
 

Versatility
4/5
 

Performance
3/5
 

Quality
4/5
 
Overall Brand Model Dimensions Weight Details
3.8
VIVREAL 6.5 x 2.8 x 1.1 inches 6.4 ounces
Check Price

Why did this edge to edge stud finder is on the fifth place?

Automatic calibration the wall detector stud finder will automatically calibrate itself when it is turned on. The calibration is done by positioning the device on the wall where there are no wood studs, ac wires, or, metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected. Four task-dependent scanning modes switch to desired mode as necessary. Stud scan is used for finding and locating the center and edges of wood or metal studs up to in (19mm) deep; deep scan is used for scanning deeper walls with a thickness up to 1 in (38mm); metal scan for locating and detecting metal (such as inch rebar) up to approximately. 2 in (60mm) deep; and ac scan for locating live ac wires up to 2 in (51mm) deep. Simple and fast the stud finder wall scanner can quickly locate the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as live ac wires. Fast detection saves users time and effort, making the task completion easier. Graphical lcd display this display indicates many cues in detection, such as detection mode, signal strength, automatic calibration, and battery indication, all with maximum readability. The low battery indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-volt battery in time.

Beep signal alert sound warning when the wall scanner has detected an object, it will beep continually. The big sound warning together with the lcd screen helps detect the most accurate location of the objects. Then a target indication bar will be displayed on the graphical lcd display screen. You can use a pencil to then mark the location of the object on the wall. The audible and visible cues reliably keep users informed for when any object, such as any metal, studs, and ac live wiring get f.

 

 
Pros
Four task-dependent scanning modes switch
Beep signal alert sound warning when
Cons
Too small for regular people.
 

 

 

№ 6. Stud Finder, Vstm 4 In 1 Multi Function Electronic Stud Sensor Wall Scanner Detector Center Finding with Digital LCD Display for Studs Wood Metal Live Ac Wire Detection

 

Ease of use
2/5
 

Versatility
2/5
 

Performance
5/5
 

Quality
5/5
 
Overall Brand Model Dimensions Weight Details
3.5
VSTM 6.6 x 2.8 x 1.3 inches 1.6 ounces
Check Price

Why did this edge to edge stud finder is on the sixth place?

Graphical lcd display,: the wall scanner features a large lcd display and a loud sound warning. When finding the material, the lcd display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion easier. And the low battery indicator icon displays when the battery level is getting low, reminding you to replace a 9-volt battery. Accurate sensor technology,: the vstm stud finder wall scanner is an electronic stud finder with advanced sensors technology which can locate studs/wood/ac wires in multiple locations on your wall accurately. Whether you are a professional, homeowner or a diy enthusiast, you can control it quickly and easily. Automatic calibration,: the wall detector stud finder would automatically calibrate itself when it is on. The calibration is done by positioning the device on the wall where there is no wood studs, ac wires or metal. The stud finder will indicate whether it has been already calibrated or not. The automatic calibration is accurate and precise, providing users with maximum reliability, greatly reducing errors in application and makes sure that most objects behind the wall can be detected.

Wide uses and warranty,: the stud finder wall scanner can quickly locate the edges and center of metal studs, pipes, rebar, joists behind walls, floors and ceilings as well as the live ac wires, help you avoid hazards while installing tvs, cabinets, garage shelves etc. 4 in 1 multi functional wall detector,: the digital wall scanner provides four scanning modes in total for detection. The stud scan detects wooden beams and joists in drywall up to 0.75 inches; deep modde detects wood and metal parts located up to 1.5 inches; metal scan detects pipe, rebar, aluminum and copper up to 2.36 inches; and ac scan for locating live ac wires up to 2 inches.

 

 
Pros
Graphical lcd display
4 in 1 multi functional wall detector
Automatic calibration
Accurate sensor technology
Cons
Special equipment is required in order to use it.
 

 

 

№ 7. Stud Finder, Veken 4 In 1 Multifunctional Wall Scanner, Professional Wall Center Sensor Detector for Studs, Metal, Wood, and Live Ac Wire

 

Ease of use
2/5
 

Versatility
4/5
 

Performance
5/5
 

Quality
2/5
 
Overall Brand Model Dimensions Weight Details
3.3
Veken Veken 6 x 2.2 x 0.8 inches 8 ounces
Check Price

Why did this edge to edge stud finder is on the seventh place?

4-in-1 wall detector, – the stud finder offers 4 detection modes to meet all the needs of home wall diy projects. The stud mode is for finding and locating the center and edges of wood and metal studs up to 3, 4 in. Deep mode is for scanning walls for 1.5in (38mm) deep studs. Metal mode is for locating metal (such as 1, 2 inch rebar) up to 2.36 in. And ac mode is for locating live ac wires up to 2 in (51mm) deep. Easy to use, – only two buttons. First, depending on the tasks you have, you can switch to the desired mode(at the central of the device). Then, just press the scan button (at the left side of the device) to automatic calibration and after scan horizontally across the object surface. Last, determine results based on lcd display and warning sounds. Accurate detector technology, – adopted to automatic calibration technique – pressing and holding the side button untill completing calibration by placing the stud finder on the wall when the beep sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy, greatly reduces errors in application and makes sure that most objects hidden in the wall can be detected. Simple design and widely application, – the stud finder sensor with excellent circuit design and high quality components, long-time uses, has lightweight, is convenient to have around the home, office.

 

 
Pros
Accurate detector technology
4-in-1 wall detector
Simple design
Lifetime warranty
Cons
The instruction manual is completely useless.
You will have to overpay for many unnecessary features.
 

 

 

№ 8. Stud Finder, 3 In 1 Multi-function Wall Stud Sensor Detector with LCD Display and Sound Warning for Ac Live Wire, Wood, Metal, Deep Scanning Kuled M79

 

Ease of use
2/5
 

Versatility
2/5
 

Performance
4/5
 

Quality
4/5
 
Overall Brand Model Dimensions Weight Details
3.0
KULED M79 5.9 x 2.7 x 1.1 inches 8 ounces
Check Price

Why did this edge to edge stud finder is on the eighth place?

3 in 1: multi-scanner stud finder for wood, metal, deep, ac current. Quickly locates edges and center of wood, wall studs, metal pipes, wooden joist, rebar behind walls, floors and ceilings, also indicates the presence of live ac wire. Compact design is easy to hold and use. Battery: 1x9v battery, included. Easy to use: only three buttons, first press on/off button, then select the probe type, after that just press and hold the scan button (at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds. Stud sensor scanner depth: detects stud up to 0.71 inches (18mm), metal up to 3 inches (76mm), deep scanning up to 1.25 inches (32mm), presence of live wire up to 3 inches (76mm).

Easy to read: lcd with digital display and continuous sound warning indicating you the location of the edges of the studs.

 

 
Pros
Compact design is easy
Stud sensor scanner depth
Cons
The housing looks too cheap despite the price.
 

 

 

№ 9. Stud Finder By Classware, Wireless Metal Detector and Ac Live Wire Multi-scanner, Multifunctional Wall Scanning Device with LCD Screen, High Precision, Long-lasting and Lightweight Design

 

Ease of use
2/5
 

Versatility
2/5
 

Performance
4/5
 

Quality
4/5
 
Overall Brand Model Dimensions Weight Details
3.0
Classware 4.8 ounces
Check Price

Why did this edge to edge stud finder is on the ninth place?

Practical size and smart design: in order to scan your walls and ceilings with the handheld stud finder, you need to hold and move your arm for a long time. At the same time, the metal detector is ergonomically designed, so you will have the most comfortable and secure grip, without straining your hand and arm. You don t have to be a professional: this small scanning device may be technologically advanced, however, it is very easy to use. Once the stud finder detects a metal, it will emit a beeping sound to notify you. At the same time, the stud material detected will be displayed on the high definition lcd screen. The metal detector has been tested multiple times, so you can be 100% sure that it works. For your convenience, classware has added a detailed instruction manual to the package. Your satisfaction is guaranteed: classware has designed the most practical and the best working stud finder.

Powerful and long lasting battery: nobody likes tugging and tangled wires. That s why this wireless metal detector is the best choice. You are only going to need a 9v battery (sold separately) in order to activate the stud finder. Classware has made sure that this metal detecting device does not consume too much energy, so you will not have to replace the powerful battery often. So start scanning the walls and ceiling of your house and don t worry about the battery. Scan your house walls with ease: do you want to find all of the wires and studs that are hidden behind the walls of your house. Don t call a professional electrician and waste a fortune. You can now do this yourself with the help of the classware stud finder. This multi-scanner can detect studs, ceiling joints, hot ac wires and other metals with very high precision. The procedure is easy, fast and even fun. Try it out and see for yourself.

 

 
Pros
Your satisfaction is guaranteed
Scan your house walls with ease
You don t have to be a professional
Cons
The housing looks too cheap despite the price.
It is easy to damage.
 

 

 

№ 10. Zircon Studsensor 70 Center Finding Stud Finder with Live Ac Wirewarning Detection and Built-in Erasable Wall Marker

 

Ease of use
3/5
 

Versatility
3/5
 

Performance
2/5
 

Quality
4/5
 
Overall Brand Model Dimensions Weight Details
3.0
Zircon 67324 8.5 x 4 x 2 inches 7.2 ounces
Check Price

Why did this edge to edge stud finder is on the tenth place?

“ready” led lights to indicate when the stud finder is calibrated and ready for use while the patented spotlite pointing system illuminates and the audio tone signal sounds when the stud center is located. Studscan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep; deepscan mode locates targets up to 1.5 inches (38 mm) deep; wirewarning detection indicates the presence of live, unshielded electrical ac wiring while scanning in studscan and deepscan modes. Integrated erasable wall marker enables users to mark targets with the simple push of a button. Act (auto correcting technology) automatically corrects common user errors, such as when scanning begins over a stud, in both studscan and deepscan modes.

The zircon ss 70 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live ac wires helping you easily find studs and avoid hazards.

 

 
Pros
“ready” led lights
The zircon ss 70 electronic stud scanner detects
Studscan mode locates
Integrated erasable wall marker enables users
Cons
May be too heavy for some people.
 
Meet the Author
My name is Caroline Brooks and I am a Reviewer. I graduated from Columbia University.

Contact me if you have any questions:
+1 (148)-363-5605
Caroline40@gmail.com
View on map
Most Read
How To Pick The Best Toddler Swim Vest
How to Choose Best Riding Exercise Bike
How to Choose Best Poulan Lawn Mowers
Finding The Best Shower Tent
Top Of Best Tiny Vacuum Cleaner
How To Pick The Best Intex Bubble Spa
Check Today Price